koukaam.se / IP kamery a videoservery

Upozorňujeme zákazníky, že diskuzní fóra na našich stránkách primárně neslouží pro získání technické podpory od společnosti KOUKAAM a.s. Pokud jste naším zázníkem a potřebujete pomoc, můžete se s důvěrou obrátit na naše Technické oddělení.

Diskuzní fóra na našich stránkách slouží především ke kladení obecných otázek a výměně zkušeností mezi uživateli.

NETIO devices | NETIO HW / FW

Jiri Holecko
Administrátor

Příspěvky: 269
Země: Czech Republic
Registrován: 15.09.09

23.07.2012 14:17:22
New FW 4.01 for NETIO 230B, NETIO 230C, NETIO 230CS

Hi,

now you can download FW 4.01 for device NETIO 230B, NETIO 230C, NETIO 230CS.

==== Version 4.01 ====

Release - 23.7.2012
-------------------------------------

+ added parametr of command "port setup" with parameters (manual/timer/unchange)
- fixed disabling timer during editing settings at the ""
- fixed problem of switched language
- fixed problem with saving value from "Power-on delay" of the Watchdog settings.

==== Version 4.0 ====

Release - 18.6.2012

-------------------------------------

+ added web interface confirmation dialogs
+ new kshell command "devtype"
+ new HTTP interface /cgi/kshell.cgi
+ new web interface
+ in web interface added multi-language support (beta - CZ, DE, EN)
+ SMTP authentication - PLAIN, LOGIN, CRAM-MD5. Doesn't support START TLS
+ new commands in kshell interface
- changed /tgi/control.tgi -> /cgi/control.cgi (/tgi/control.tgi exists for
backward compatability)
- fixed short outlet switch when time is in the past
- fixed Repeat timer issue: "To" time is less then "From" time
- fixed HTTP server, added IP lost packet retransmition

Known bugs:
- Firmware update in Linux + Firefox doesn't work
- Watchdog: with some settings "Turn off permanently" doesn't work
- User manual will be available in may 2012

==== Version 4.0 beta 9 ====

Beta - 24.4.2012

-------------------------------------

+ in web interface added multi-language support (beta - CZ, DE, EN)
+ SMTP authentication - PLAIN, LOGIN, CRAM-MD5. Doesn't support START TLS
+ new commands in kshell interface
- changed /tgi/control.tgi -> /cgi/control.cgi (/tgi/control.tgi exists for
backward compatability)
- fixed HTTP server, added IP lost packet retransmition
Known bugs:
- Firmware update in Linux + Firefox doesn't work
- User manual will be available in August 2012

IMPORTANT:
The Upgrade to version 4.x from 3.xx will reset all your settings to default because of upgrading the core of the FW.

Best regards Jiri Holecko

Editováno Jiri Holecko v 17.04.2013 00:34:48

Luke_Filewalker
Člen

Příspěvky: 89
Země: Germany
Registrován: 13.07.11

19.10.2012 12:36:57
RE: New FW 4.01 for NETIO 230B, NETIO 230C, NETIO 230CS

Hi all

After several months with daily use of NETIO B and CS and FW4.01 and FW4.0 i can say the following:

* The FW4.x is very stable. No crashes, no freezes.
* The new GUI is realy good and is a lot more practical than the old GUI.
* CGI interface is much faster than with FW3.x, especially on C/CS.

With other words: FW4.x and LFNC are just good friends.

Well done Koukaam.