IP camera ACTi ACM-1011

Camera ACTI TCM-1011 is VGA resolution IP camera with day / night function for indoor use. As imaging device is used 1/3"" Micron Progressive Scan CMOS chip. This model has automaticaly switched IR-cut filter and for low light conditions there are integrated IR LEDs on camera. User can choose either MJPEG or MPEG-4 compression method. Resolution can be set to 640×480px, 320×240px or 160×120px. Camera use power input of 12VDC or Power over Ethernet (IEEE802.3af, Class 3). HTTP server inside camera allows remote access over Internet or local network and You can watch and manage cameras from any place in the world where internet connection is available.

This product is not in production anymore (EOL).

• Camera type: Bullet
• Camera body type: Indoor

• Interface: 10/100 Mbit/s Ethernet, RJ-45
• Supported protocols: TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP

• Sensor: 1/3" Micron Progressive Scan CMOS
• Day/night feature, sensitive to IR illumination, built-in mechanical IR-cut filter
• Integrated illuminator (IR LED 20 ~ 30 m)
• Sensitivity in day mode 4 Lux / 0 Lux in night mode (b&w)
• Image framerate up to 30 fps in resolution 640×480 px
• Number of megapixels: 0.3
• Video compression: MJPEG, MPEG-4
• Other sensor parameters: Shutter 1/5 ~ 1/15 000 s, AGC, AES, AWB

• Lens 3,3 - 12 mm, integrated
• Horizontal viewing angle: 22.6° ~ 78.5°

• External microphone input (Audio In)
• Loudspeaker output (Audio Out)
• Audio compression: 8 kHz, Mono, PCM

• Not available

• Power voltage: 12 VDC
• PoE 802.3af
• Consumption approx. 6.24 W

• Dimensions: W 68 × H 156 × D 0 mm
• Weight: 505 g

• Operating conditions range: 0° to 50 °C